and repair of the MicroVerb IV and NanoVerb Stereo Effects Processors. Alesis sells or transfers the Manual to you on the following terms. View and Download Alesis NanoVerb Stereo Amplifier reference manual online. ALESIS Reference Manual stereo amplifier. NanoVerb Stereo Amplifier. ALESIS Nanoverb Reference Manual – Read more about nanoverb, input, output, mixer, manual and stereo.
|Published (Last):||3 May 2017|
|PDF File Size:||12.9 Mb|
|ePub File Size:||19.34 Mb|
|Price:||Free* [*Free Regsitration Required]|
Alesis Digital Effects Processor NANOVERB-2 user manual
Your First Session with the NanoVerb Alesis warranty card It is important to register your purchase; if you have not already filled out your warranty card and mailed it back to Alesis, please take the time to do so now.
Basic Connections The NanoVerb will work in many different applications, whether you are connecting an instrument directly into it, or connecting it with a mixing console.
During normal operation, this LED should turn green whenever there is signal coming manua the inputs. If the signal level is at the maximum, this LED will turn red and you will begin to hear the signal distort.
In any case, make sure to place it safely where it will not fall or be damaged. Alesis cannot be responsible for problems caused by using the NanoVerb or any associated equipment with improper AC wiring.
Chapter 2 — Connections Typical Applications The audio inputs and outputs are typically used in one of three ways: Mono In – Stereo Out. Chapter 2 — Connections In the above hookups, you must set correct levels on the mixer’s individual Aux Sends, Aux Masters, and Aux Return masters as well as the NanoVerb’s own controls to get good, clean, quiet results.
Improper level setting is the most common cause of noise and distortion problems. Never connect an output intended for a loudspeaker the power amplifier output to the input of the NanoVerb. This is a mono jack with connections for a normal momentary footswitch. The footswitch must be plugged in before the NanoVerb has its power turned on. You should not use the footswitch supplied with a guitar amplifier, as these are typically latching type footswitches. This decaying action is influenced by the room size, the location of the sound source in the room, the hardness of the walls, and many other factors.
He would place the drum set in a large, reverberant room, mic the room and chop off the end of the reverb tail with a noise gate. By slowing down one tape machine, and then letting it catch up with the other, different phase cancellations would occur at different frequencies.
It works great on guitars, synths and electric pianos. The power supply included with the NanoVerb is compatible with the electrical requirements of the country of purchase, and should be connected to the proper electrical outlet. Service on this product should be performed only by qualified technicians.
Talk the problem over with one of our technicians; if necessary, you will be given a return order RO number and instructions on how to return the unit. Page of 29 Go. Table of Contents Add to my manuals Add.
Alesis – NanoVerb – Reference Manual
Page 3 NanoVerb Reference Manual Your First Session With The Nanoverb Alesis warranty card It is important to register your purchase; if you have not already filled out your warranty card and mailed it back to Alesis, please take the time to do so now. Typical Applications Chapter 2 — Connections Typical Applications The audio inputs and outputs are typically used in one of three ways: Page 15 Mono In – Stereo Out. Using Inserts Chapter 2 — Connections In the above hookups, you must set correct levels on the mixer’s individual Aux Sends, Aux Masters, and Aux Return masters as well as the NanoVerb’s own controls to get good, clean, quiet results.
Troubleshooting Service on this product should be performed only by qualified technicians. Comments to this Manuals Your Name.
Enter text from picture: By pressing ‘print’ button you will print only current page. To print the manual completely, please, download it. Don’t show me this message again. Got it, continue to print. Don’t have an account?